Wide, Light Weight, Super Midrange Underwater Strobe
Following latest features of the Z-330 strobe, the D-200 is designed to deliver maximum G.N. 20 and focus on optical trigger system. Built-in dome lens is optically designed to offer wide 110 degree coverage underwater without any diffuser which can sacrifice power. High performance, multi-function and friendly handling with lightest underwater weight supports your underwater photography with superior performance.
- 110 degrees coverage UNDERWATER without diffuser.
- Powerful Guide Number 20.
- Easy to handle as the strobe is slightly buoyant underwater giving 4g lift.
- 13-step Manual Mode in addition to proven S-TTL Auto.
- Bundled "Strobe Light Shade" to prevent shining camera lens
- 220 lumen, shutter linked auto OFF Focus Light
- Easily visible conspicuous phosphorescence back control panel during day and night.
- Improved intuitive controllability with larger control dials
- Newly designed radiation system to release generated heat inside to underwater
- Highly versatile optical cable connection.
- Minimum recycle time "approx. 1.3 sec." at Full Flash.
- On-board Wireless TTL capability.
Easy to Handle Underwater, Buoyant at 4g
The D-200 strobe provides buoyancy at 4g (*3) underwater including 4 x AA eneloop batteries and Strobe Light Shade making the strobe slightly buoyant underwater. By attaching an adapter such as "Z Adapter MV" or "Z Joint" can have almost neutral buoyancy in salt water. A heavy underwater weight strobe may cause sudden strobe movement with its own weight when unclamping too much while neutrally buoyant D-200 offers comfortable strobe aiming adjustment as well as easy handling underwater.
(*3) Buoyancy measured in freshwater is about 4g/0.1oz. Calculated buoyancy in sea water is about 23g/0.8oz. Including 4 x "eneloop" batteries and Strobe Light Shade.
S-TTL Auto /13 Steps Manual Flash Mode
Proven and reliable INON's unique super accurate auto exposure system "S-TTL" Auto mode (patented) is onboard to support easy and solid underwater shooting with appropriate exposure.
In addition, optimized high performance slave sensor never miss camera's trigger signal even with faint signal or partially damaged fiber optics cable can still trigger the strobe not to bother you with unstable flashing.
Precise 1/2EV. increment 13 steps Manual flash control is onboard as well to support professional use where fine power adjustment is required to provide highly accurate lighting.
EV. Controller to Adjust Exposure of S-TTL Auto
It is simple to fine-tune flash power in S-TTL Auto by dialing the EV. Control Switch on the back control panel. Adjustable range is 3 steps to increase and 6 steps to decrease. It is easy and simple to suit to your intended exposure or different exposure control characteristics among camera models.
Bundled "Strobe Light Shade" to Prevent Shining Camera Lens
The "Strobe Light Shade" is bundled as standard accessory to cut a part of strobe light to benefit to dramatically suppress flare or ghost by not shining camera lens directly and backscatter when a strobe is positioned to vicinity or ahead of lens port by blocking light between lens port and subject not to shine suspended particles.
The flange part rotates 360 degree. Intuitive operation and comfortable adjustment is supported with light clicks even underwater while you shoot.
The shade is removable.
- Additional Information
Dimensions Diameter: 102mm/4.0in, Hight: 131mm/5.2in, Depth: 125mm/4.9in (without Strobe Light Shade / Strobe Dome Filter SOFT) Diameter: 111mm/4.4in, Hight: 131mm/5.2in, Depth: 129mm/5.1in (with Strobe Light Shade) Depth 100 Product Weight 577g/20.4oz (without Strobe Light Shade / Strobe Dome Filter SOFT / batteries) 729g/25.7oz (with Strobe Light Shade / 4 x "eneloop" batteries) Colour Red Material Polycarbonate resin SKU/EAN Inon-d200