Using TTL ("Thru-the-lens") metering, the camera evaluates the amount of light in the scene and the position of the subject and adjusts the external strobe(s)' power accordingly for a properly lit photo. All you need to do is set the strobe on TTL and pull the trigger.
Advantages to TTL
Several key advantages mean that you'll never miss the shot:
- You never have to change the power settings on your strobes.
- Your strobes will recycle faster.
- You can focus on your composition and camera settings.
- Your camera and strobe batteries will last longer.
- Support for Rear Curtain Sync flash mode.*
* Supported with CT1K kits produced December 5, 2017 and later.
A direct electrical connection to the strobe by sync cord means that the camera is aware that an external strobe is attached and can use this information for more accurate exposure. Strobe exposure compensation can be added or subtracted through the camera's menus.
Ikelite's internal TTL circuitry and hot shoe is designed for use with select Ikelite housings for Canon DSLR cameras, see Housing Compatibility below. Not intended for use with non-Ikelite housings.
# 6871.09 / 200FL Housing for Canon 5D Mark III, IV, 5DS(R)
# 71700 / 200DL Housing for Canon 5D Mark II
# 71702 / 200DL Housing for Canon 5D Mark III, IV, 5DS(R)
# 71708 / 200DL Housing for Canon 7D Mark II
# 71710 / 200DL Housing for Canon 80D
# 73702 / 50DL Housing for Canon 5D Mark III, IV, 5DS(R)
Not compatible with any other models except as listed above
Not compatible with non-Ikelite housings
Ikelite DS50 above serial # 70000
Ikelite DS125 above serial # 5000
Ikelite DS160, DS161
Ikelite DS200 above serial # 7163
Hotshoe with connector
- Additional Information
Part Number #46070 SKU/EAN 883711053585