Ikelite have designed this housing to offer one of the best value performances in the world. The Ikelite DSLR housing is a seamless blend of functionality, lighting integration, durability and waterproof integrity.
The True TTL Advantage
Other housings simply waterproof your camera. An Ikelite TTL housing improves your photos. TTL or "Through-The-Lens" flash metering means the camera controls flash duration to properly expose an image. Our built-in proprietary circuitry tells your camera that a TTL external flash is attached, allowing the camera to adjust exposure more accurately than with slave TTL strobes.
iTTL converter module interfaces with current Ikelite DS-series Substrobes. Dial at rear provides TTL exposure compensation or 7 manual power settings in ½EV steps. Super-Eye long eye-relief viewfinder optic allows full frame viewing with diving mask. iTTL conversion circuitry provides full TTL operation with Ikelite DS-series substrobes. Large exposure compensation dial on rear of housing gives ±1+1/3 EV control range in TTL mode, or 7 manual settings in 1/2 EV steps.
Fiber optic slave flash units require the camera's flash to fire every time. This creates a shutter lag as you wait for the camera's flash to recycle in between shots, drains your camera's battery life, and builds up heat inside of the housing. Ikelite electronics translate direct electrical impulses from your camera, triggering your strobe and precisely adjusting its power without the need to fire the camera's flash. This eliminates the slave TTL strobe issues of signal interference, inconsistent exposure due to weak fiber optic transmission and false triggering caused by light rays bouncing off the water's surface or your buddy's flash going off.
Exposure adjustments directly through the back of the housing put the perfect shot within reach every time. Tweak your TTL exposure or take total manual control without taking your hand off of your housing. Controls on the back of the housing acts as a remote control for compatible Ikelite DS-series strobes. Access plus/minus exposure compensation in TTL mode, plus manual power settings in half-stop increments.
An over-sized knob smoothly engages our unique system of universal zoom gears. We provide two zoom sets with each housing, one for use with most popular larger diameter zoom lenses and a second designed for use with smaller diameter zoom lenses. Both sets are lightweight and easy to install with no modification to the lens required. A variety of dome and flat ports attach with four locking latches for maximum security and quick changes between dives.
This housing includes a balanced aluminum tray with our signature quick release handles for easy attachment and removal of external lighting. An aluminum 1/4-20 threaded top mount provides an additional attachment point for lightweight accessories.
Special polycarbonate blends allow us to create an extremely strong yet clear and lightweight enclosure. We believe there's no substitute for inspecting the actual o-ring seal once your housing is closed. Our signature clear construction lets you see that the housing is watertight and dry before you enter the water, and provides full view of the camera while you're diving. Polycarbonate is fundamentally corrosion-resistant for easy maintenance year after year.
Like every Ikelite product, our housings are designed, built, and tested in the USA. We use locally sourced, top-grade materials. Our housings are built by hand and individually tested for fit, function and waterproof integrity. The average assembly technician is a certified scuba diver and has over 16 years of experience building Ikelite products. We back our products with over 50 years of experience and the most accessible and responsive customer service staff in the dive industry.
This housing requires the addition of a compatible lens port for waterproof operation. Lens port not included.
DS50: yes, above serial number 70000
DS125: yes, above serial number 5000
DS160, DS161: yes
Non-Ikelite: yes, manual flash exposure only
Tray with dual quick release handles
Port hole cover
Waterproof bulkhead cap
5509.27 Universal zoom set up to 2.8-inch diameter
5509.28 Universal zoom set 2.8 to 3.0-inch diameter
Silicone lubricant 1cc tube
Micro-fiber lens cloth
1 year manufacturer warranty
200 ft (60m) depth rating
All important camera functions are accessible
Controls are not provided for Diopter Adjustment Control or Flash Mode/Compensation Button
Ikelite bulkhead connector with built-in TTL circuitry
Slightly negative buoyancy in fresh water
Actual buoyancy varies depending on choice of lens and port
Weight 5.4 lb (2.4 kg) not including tray + handles
Dimensions 9.8 x 6.7 x 6.7 in (25 x 17 x 17 cm) including projections
#0132.59 Main o-ring
#0105 Port o-ring
#9104.5 Waterproof bulkhead cap
#0200.91 Housing body cap
#0184.2 Silicone lubricant resealable 2cc tube
- Additional Information
Camera Specific Housing Finder Nikon D5500, Nikon D5600 Depth Rating 60m Port Ikelite port system Controls Access to all important camera functions Sync Connection Ikelite ICS5 bulkhead Mounting Options Quick-release mounting points on each handle. Notes Interchangeable port system. A port is required but not included. Ports must be chosen based on the lens. Material Corrosion-free clear polycarbonate. Product Weight 3.5Kg Width 250mm Height 180mm Depth 160mm Part Number #6801.55 SKU/EAN 883711050577