Ewa-Marine V102 housing

Ewa-Marine V102 housing

Ex. VAT: £300.00 Inc. VAT: £360.00

The V102 is the 10 meter (30 ft) depth housing for the for the Canon EOS C100 camcorders, accepting both the Mark I and Mark II versions.

Description

Details

The V102 is the 10 meter (30 ft) depth housing for the for the Canon EOS C100 camcorders, accepting both the Mark I and Mark II versions. The compact and handy underwater housing has a depth rating of up to 10 meters.

Designed specifically for the cinematic EOS C100 camera the V102 UW-housing is manufactured from special, laminated PVC and has an integrated, optically neutral flat glass port. Special, clear inlays at the rear allow a perfect view of both monitor and view finder.

The straps at the bottom allow weights to be attached for perfect buoyancy on and under water.

Important information:

The underwater housing is designed for Canon EOS C100 in combination with Canon EOS lenses of up to 82mm filter thread. For lenses with filter thread larger than 82mm, please see Custom Housing information below*

To fit lenses with a maximum length 145mm (5.7inches).

To fit lenses with a filter thread size of 77mm as sold. Alternatively smaller lenses can be used with industry standard reduction adapters or a lens with 82mm filter thread could be used with the optional ewa-marine CA82 adapter available separately.

We can also supply you with a custom version of this housing with regards to the front port, depending on the lens you wish to use.

*To use a Canon C100 with Canon Cinematic, Zeiss Prime or other, large non EOS lenses, we need to build a custom housing with a larger front port (128mm Ø). We will need to know the lenses being used, to check whether more lens room is required in the housing.
Product Information and Technical Details

Designed specifically for the original version / Mark1 of the Canon EOS C100, the ewa-marine V102 underwater housing is manufactured from our special, double laminated PVC and has an integrated, optically neutral flat glass as a front port. With this housing you will receive an 77mm filter adapter (a 82mm adapter is available as an optional extra). By means of this adapter the camera is then docked into the housings front port, ensuring that the lens remains parallel and centered behind the front of the lens. Just as if it were a clear, neutral optical filter.

It has a pair of non-corrosive and seawater resistant clamping rails which fit together for perfect sealing.They tighten by means of three screw knobs. There is also the practical, adjustable carry strap on the clamping rail.

It is supplied in a handy yellow storage and carrying case.
Overall Width = 29 cm (11.4 inches)
Length of floor section = 27 cm (10.6 inches)
Housing Height = 21 cm (8 1/4 inches)
Front Port Tubus = yes
max. Filter Diameter = 82 mm
Weight = 650g (1.4 lbs)

Actually, it's not in a box at all. Ewa-Marine supply this unit in a handy, yellow, nylon carry bag. This bag is ideal to store and transport your ewa-marine housing, it also helps reduce unnecessary packaging-waste.

In Addition to your housing and closing rail you will get the following with your new ewa-marine:

manual for ewa-marine video housings
sachet of Camera-Dry silica-gel
foam padding
CA-77 adapter for 77mm filter thread

 

Additional Information

Additional Information

Camera Specific Housing Finder Canon EOS C100, Canon EOS C100 Mark II
Depth Rating 10m (30ft)
Max filter diameter 82mm
Product Weight 650g / (1.4 lbs)
Width 29 cm / (11.4 inches)
Height 21 cm / (8 1/4 inches)
Length 27 cm / (10.6 inches)
Part Number V102
SKU/EAN 4035144004474