Housing accommodates
camera with LCD open. Large 2 x 3" rear window permits
a wide range of viewing angles (external monitor is not required).
Dimensions /cm: 19L, 14H,
25W (38 with handles).
Weight: 3.5Kg.
Buoyancy: slightly negative. |
 |
Warranty - 2 years
renewable
There is no bulkhead
video output connector on the housing. Connector can be fitted
on request, but housing must be drilled at the factory incurring
extra cost and delivery time.
Under some lighting
conditions, the HC7 /HC9 camera may pick up a reflection of any
writing or reflective markings on the front of the lens. The
solution is to go over any white or light-coloured/reflective
markings with a black alcohol-based (permanent) felt-tip pen.
Inking out the lens markings also improves performance when using
ordinary filters and diopters above water. If you want to restore
the lens to its original condition, you can remove the ink with
cotton buds and alcohol (either industrial methylated spirit
or isopropanol). |
|
10-10-965 + |
Gates housing for Sony HC7/HC9 camera. LCD open. With White balance
control.
No port. |
£ 1652.17 |
£ 1899.99 |
|
10-25-813 |
O-ring set for HC7/HC9 |
£ 34.03 |
£ 39.13 |
|
10-10-865 |
Gates HC3 housing LCD OPEN, no port |
£ 1361.69 |
£ 1565.94 |
|
10-25-812 |
O-ring set for HC3 |
£ 34.03 |
£ 39.13 |
|
Retro control |
White balance control, retro-fit for HC3
Shipping extra |
£ 106.38 |
£ 122.34 |
Lighting Options
E&OE |