 |
Housing for Canon EOS 7D |
 |
Depth rating: 60m Controls for all camera functions exceept multi-controller and flash pop-up. Extension lever on back panel gives ergonomic movie start/stop control. Interchangeable port system. Port is supplied separately.(Port choice depends on lens to be used). Super-Eye long eye-relief viewfinder optic allows full frame viewing with diving mask. |
eTTL2 conversion circuitry provides full TTL operation with Ikelite DS-series substrobes. Two substrobes can be triggered using a dual sync cord. Exposure compensation buttons on rear of housing gives ±2 EV control range in TTL mode, or 8 manual settings in ½ EV steps.
Non-Ikelite strobes can be used in manual mode only (with appropriate sync cord). Dimensions SLR-DC: With tray: 13.25"w, 8"h, 6.5"d. Without tray: 9.5"w, 6.75" h, including knobs. Weight: ~3.25Kg, 7.15lb without port. ~3.6Kg, 8lb with port. Buoyancy: slightly negative (depending on port). |
 |

This housing cannot be used without a
lens port.
 | Housing for Canon EOS 7D Does not include camera. Port required, Not included ikelite #6871.07 | |  | Spare O-ring for dSLR housings, 200D, 10D, etc. ikelite #0132.61 | |  | Spare rear O-ring for SLR port Fits between port and housing body ikelite #0105 | |  | Silicone grease 1cc (pack of 4) ikelite #5020 | |
|