 |
YS-90AUTO |
|
When used with a normal sync. cable, the YS-90AUTO operates in
TTL auto, slave, and manual modes. When used with the optional
fibre-optic cable, the flash is slave triggered, and has special
provision to avoid mis-triggering with cameras which use pre-flash.
Triggering via fibre-optic is manual only, but total exposure
control is achieved by means of a 12-increment light-output level
selector dial. |
|
Guide No. (air) /m |
Beam
Angle |
Colour Temp. |
Flashes per charge* |
Recycle
Time* |
Power
Source |
Max
Depth |
|
22 |
105 x 95° |
5500K |
Alkaline: 200
NiCd: 120 |
Alkaline: 6.5 sec
NiCd: 4 sec |
4 x AA Cells |
60m |
* Battery life and recycle time will
vary depending on battery manufacturer and storage conditions
|
03101 |
YS-90 AUTO (strobe head only) |
discontinued |
|
58030 |
YS-90 Diffuser and fibre-optic cable |
£ 30.63 |
£35.99 |
|
10580 |
YS90 o-ring kit |
£.6.80 |
£ 7.99 |
|
|
Spare back door for strobe |
£.20.42 |
£ 23.99 |
|
|
Fibre-Optic Cable
(58030)
Coiled cable and fittings only.
Strobe, arm, tray, camera
& housing not included. |
|
E&OE
 01404 812277 |
Set the control
on the YS-90AUTO to match the f-stop of
your digital camera. The strobe will automatically put out just
the right amount of light.
