Cameras Underwater

  • Increase font size
  • Default font size
  • Decrease font size
Olympus Flash
Olympus UFL-1 TTL slave flash Olympus UFL-1
TTL slave flash
40m depth rating
Guide no.14 in air (full)
 75° Coverage.
Colour temp.: 5600K (5100K with diffuser)
Manual and Olympus TTL shooting modes
Sea&Sea type fibre-optic cable port (fits L-cable ss50107)
Power: 2 x AA cells
3s recycle time
Number of flashes: Alkaline 200, NiMH 300		 Olympus UFL-1 TTL slave flash
YS-mount. Compatible with 10Bar, Epoque, and Sea&Sea arms. (Also fits TLC #17760, and Ultralight YS-mount arms).
Dimensions /mm: 90 x 110 x 140 (excluding protrusions).  Weight: 425g excluding batteries.
    ex VAT inc VAT
UFL-1 UFL-1 flash (head only, no bracket) £ 316.66 £ 379.99
POL-U1 Spare back-door o-ring for UFL-1 £ 12.76 £ 15.31

Fibre-optic cable with L connectors
SS 50107
Fits PT-EP01 etc.


Olympus UFL-2 TTL slave flash Olympus UFL-2
TTL slave or electrical triggering
60m depth rating
78° coverage.   Guide No. 11 (metres).
FP mode for sync. at high shutter speeds.
Fibre-optic and Olympus TTL electrical connectors.
TTL or manual, with manual output dial.
AF illuminator
5s recycle time (after full output).
YS-mount. Compatible with 10Bar, Epoque, Ultralight, TLC and Sea&Sea arms.
    ex VAT inc VAT
UFL-2 UFL-2 flash (head only, no bracket) £ 499.99 £ 599.99
UFL-DP3 Diffuser for UFL-2 flash £ 42.54 £ 51.05


PFL-E01
Underwater housing for FL-36 flash.

Kit includes: TTL sync cable, internal hot-shoe connector cable for the camera housing (PHCB-01), and diffuser.

YS Mount - fits lighting arms with Sea&Sea type attachment.		 Olympus FL36, PFL-E01

  Flash unit and housing are purchased separately. ex VAT inc VAT
PFL-E01 Underwater Housing for FL-36 flash (flash not included). £ 541.66 £ 649.99
FL-36 FL-36 flash £ 208.33 £ 249.99
PTCB-E01 Spare underwater TTL Cable (Olympus to Olympus). £ 95.64 £ 114.77


Sync. cables for housings with Olympus connector
Electrical triggering allows the camera built-in flash to be switched off, conserving the camera battery and eliminating light leakage into the lens port.

Olympus to N5 cable
Nikonos - Olympus		 Olympus to Duo cable
Duo - Olympus		 Olympus hot shoe PHCB-01

Hot-shoe connector
PHCB-01
(Required by camera housing)

Epoque N5 - Olympus sync cable N5 to Olympus Sync cable. Epoque ES-SC-OLF
connects Epoque flash with N5 socket to Olympus bulkhead socket
Manual sync only. Camera housing requires Olympus PHCB-01 hot shoe connector.		 £100.00
Olympus hot-shoe connector Olympus PHCB-01 hot-shoe connector
connects camera's hot-shoe to Olympus housing bulkhead		 £30.62
10Bar Sync cord OPM5-SSM5, Duo flash to Olympus hsg Sync cable, flash with YS Duo connector (Sea&Sea, Inon) to Olympus housing
10Bar SyC-O5-S5		 £51.05


Note on the Olympus flash connector:
If your housing has a sync connector with a metal thread, do not leave the sync cable connected to it for long periods. The metal version of the Olympus connector requires frequent maintenance. Remove the cap or plug after diving and apply O-ring grease to the screw thread before reassembly. Failure to carry out this procedure can result in seizure of the screw thread due to salt water corrosion. Attempting to remove the blanking cap or sync-cable plug by force will rip the bulkhead connector from the housing and is likely to cause irreparable damage.		 Olympus connector


Bulkhead Housing flash sync. connector for PT-030. 1 secondhand unit left only £ 30.43 ex VAT £ 36.52 inc VAT


E&OE