Flash

---

Olympus UFL-1 TTL slave flash 40m depth rating Guide no.14 in air (full)  75° Coverage. Colour temp.: 5600K (5100K with diffuser) Manual and Olympus TTL shooting modes Sea&Sea type fibre-optic cable port (fits L-cable ss50107) Power: 2 x AA cells 3s recycle time Number of flashes: Alkaline 200, NiMH 300

YS-mount. Compatible with 10Bar, Epoque, and Sea&Sea arms. (Also fits TLC #17760, and Ultralight YS-mount arms).
Dimensions /mm: 90 x 110 x 140 (excluding protrusions).  Weight: 425g excluding batteries.

Fibre-optic cable with L connectors Sea & Sea SS 50107 Fits PT-EP01 etc.

---

Olympus UFL-1 Underwater Strobe Olympus UFL-1 £379.99 inc. VAT £316.66 ex. VAT Olympus POL-U1 spare back door O-ring for UFL-1 strobe/flash £18.37 inc. VAT £15.31 ex. VAT Fibre optic cable with L connectors, for Sea & Sea type socket Sea & Sea 50107 £68.99 inc. VAT £57.49 ex. VAT

---

Olympus UFL-2 TTL slave or electrical triggering 60m depth rating 78° coverage.   Guide No. 11 (metres). FP mode for sync. at high shutter speeds. Fibre-optic and Olympus TTL electrical connectors. TTL or manual, with manual output dial. AF illuminator 5s recycle time (after full output). YS-mount. Compatible with 10Bar, Epoque, Ultralight, TLC and Sea&Sea arms.

Olympus UFL-2 Underwater Strobe Olympus UFL-2 £599.99 inc. VAT £499.99 ex. VAT Olympus UFL-DP3 Diffuser (spare) for UFL-2 Underwater Strobe Olympus UFL-DP3 £51.05 inc. VAT £42.54 ex. VAT

---

PFL-E01 Underwater housing for FL-36 flash. Kit includes: TTL sync cable, internal hot-shoe connector cable for the camera housing (PHCB-01), and diffuser. YS Mount - fits lighting arms with Sea&Sea type attachment.

	Flash unit and housing are purchased separately.	ex VAT	inc VAT
PFL-E01	Underwater Housing for FL-36 flash (flash not included).	£ 541.66	£ 649.99
FL-36	FL-36 flash	£ 208.33	£ 249.99
PTCB-E01	Spare underwater TTL Cable (Olympus to Olympus).	£ 95.64	£ 114.77

---

Sync. cables for housings with Olympus connector Electrical triggering allows the camera built-in flash to be switched off, conserving the camera battery and eliminating light leakage into the lens port.

Nikonos - Olympus

Duo - Olympus

Hot-shoe connector PHCB-01 (Required by camera housing)

N5 to Olympus Sync cable. Epoque ES-SC-OLF connects Epoque flash with N5 socket to Olympus bulkhead socket Manual sync only. Camera housing requires Olympus PHCB-01 hot shoe connector. £100.00 inc. VAT £83.33 ex. VAT Olympus PHCB-01 hot-shoe connector connects camera's hot-shoe to Olympus housing bulkhead £34.99 inc. VAT £29.16 ex. VAT Sync cable, flash with YS Duo connector (Sea&Sea, Inon) to Olympus housing 10Bar SyC-O5-S5 £51.05 inc. VAT £42.54 ex. VAT

---

Note on the Olympus flash connector: If your housing has a sync connector with a metal thread, do not leave the sync cable connected to it for long periods. The metal version of the Olympus connector requires frequent maintenance. Remove the cap or plug after diving and apply O-ring grease to the screw thread before reassembly. Failure to carry out this procedure can result in seizure of the screw thread due to salt water corrosion. Attempting to remove the blanking cap or sync-cable plug by force will rip the bulkhead connector from the housing and is likely to cause irreparable damage.

Bulkhead

Housing flash sync. connector for PT-030. 1 secondhand unit left only

£ 30.43 ex VAT

£ 36.52 inc VAT