![]() |
ikelite iTTL (Nikon DSLR) adapter interfaces non-ikelite SLR housing to DS-series substrobe Does not work with Canon cameras |
![]() |
ikelite ICS5 or Nikonos connector at housing end ikelite ICS5 connector at Flash end for connection of Single or dual sync cords |
|
| housing end | Flash end | |
![]() |
Same iTTL conversion circuitry as in Ikelite Nikon DSLR housings (exposure compensation is not provided, but can be accessed via the camera's built-in menus) Gives TTL exposure control with current Ikelite DS-series Substrobes and non-Ikelite housings Rotary switch on body permits toggling between TTL and manual exposure Has reliable Ikelite bulkhead connection at strobe end for attachment of single or dual sync. cord (cord not included). Dual strobe use requires dual sync. cord. Two strobes cannot be operated by independent adapters (even if the housing is equipped with two bulkhead connectors). |
Compatible with many brands of underwater camera housing. Adapter is not intended for use with Ikelite housings. Some housing manufacturers (e.g., Subal) offer a choice between Nikonos V and Ikelite ICS5 connectors. The Ikelite connector is by far the more reliable.Requirments: Nikon D40, D50, D60, D70, D70S, D80, D90, D200, D300, D700, D7000 or Fuji S5 Pro camera and housing with 5-wire hot shoe connection to Ikelite (ICS5) or NikonosV bulkhead socket (Refer to housing specifications or contact manufacturer for connector wiring information). ikelite 4103.51 or 4103.52 TTL sync cord for connection to DS-series Substrobe(s). Requires current model ikelite DS-series Substrobe(s). For older models, see compatibility information on ikelite's website Adapter is NOT compatible with non-ikelite strobes |