Lens holders

Holders (caddies) for screw-fit lens accessories
Allow safe parking of detached wet lenses and filters.

Holders for Inon bayonet lenses (AD and LD) are shown on the corresponding lens page.

10Bar lens holders, M46, M55, M67

M46 T-shoe

M55 T-shoe

M67 T-shoe

M67 Velcro

Allows one accessory lens or filter to be carried conveniently when not fitted to the camera. Available in M46, M55 and M67 thread sizes.
T-slot version mounts on standard T-base on tray or handle (eg. 10Bar slot stay, ikelite dual AF35 tray).
Velcro strap version mounts on cylindrical or flex arms (etc.).

	10Bar 46mm (M46) lens holder mounts on standard T-base on tray or handle eg. 10Bar slot stay	£25.52
	10Bar 55mm (M55) lens holder mounts on standard T-base on tray or handle eg. 10Bar slot stay	£25.52
	10Bar 67mm (M67) lens holder mounts on standard T-base on tray or handle eg. 10Bar slot stay	£25.52
	10Bar 67mm (M67) lens holder, velcro straps fits most cylyndrical arms, flex arms, etc.	£25.52

Inon M67 Lensholders

To hold supplementary lenses and filters when they are not attached to the camera.

For lens accessories with male M67×0.75 thread.

S and W types fit INON and Ultralight lattice arms (or any bar 10×25mm with midline hole or cutout >5mm).

Lensholder M67 S (for 1 lens)
Lensholder M67 W (for 1 or 2 lenses)
Lensholder M67 F (for Inon float arms)
(Arm section is not included).
Type W (shown right) includes additional parts to mount with one lensholder only.

	M67 lens holder S (single), for standard Inon arm	£49.99
	M67 lens holder W (double), for standard Inon arm	£70.00
	M67 lens holder F, for Inon Float Arm	£29.99

Assembly procedure for type S, or type W when only used to hold one lens.

Assembly procedure for type W.

E&OE

Cameras Underwater