 |
Substrobes for
film cameras
spares, accessories, residual
stock. |
Substrobe
50
 |
50 Joule strobe with seals
between battery and electronics compartments. Runs from 4x AA
cells (alkaline or Ni-Cd). Supplied with mounting lug, bolt and
handwheel nut for fitting to standard arm lug. Connector blanking
cap included.
Angle of coverage: 70 degrees.
ISO 100 Exposure guide: f/9.5 @ 1m underwater.
Colour temp: 5700K. Recycle time: ~3.5sec.
Weight 0.6Kg. 8cm dia, 12cm long. |
For spares and accessories, see the DS-51
page
Substrobe
100A
 |
| 100 Joule output, with angle of coverage adjustable
from 80 to 95 degrees. Features: built-in modeling light, sealed
battery compartment; full power, 1/2 power, and TTL flash modes.
Supplied with mounting lug, bolt & handwheel nut for standard
arm. Ball mount (shown right) is an optional extra. Supplied
with connector blanking cap. |
 |
ISO 100 exposure guide: f/9.5 (80deg), f/8 (95deg) @
1m underwater. Colour temp: 4800K. Recycle time: ~3.8 sec.
Power source: 4 x D cells (alkaline or Ni-Cd), or optional Ni-Cd
pack. Weight: 1.6Kg. 11.5cm dia. 20cm long.
4046 Substrobe 100A orange.........................discontinued
4046.1 Substrobe 100A black........................discontinued |
| |
4045.4 SS100A Ni-Cd Pack (was £ 70.00) . . . . . . . . . £ 40.00
Industrial grade 5Ah 4.8V NiCd Pack.
150 full power flashes.
Compatible with 4063 Smart Charger
4045.1 Ni-Cd Pack with 220V Euro charger . . .
. . . £80.00 |
 |
Spare lamp bulb for Substrobe
100A and Mini-C Lite.
0042.52 5.2V 0.85A (4.4W) Halogen Lamp ...............
£5.99 |
| |
9446.2 Spare back door Ai,
Ai/n, 100A ...................... £10.00
0134.47 Spare back door O-ring ................................
£4.99 |
 |
Mounting Ball for SS100a,
Ai, Ai/N and SS200.
1.25" version mounts to Ikelite ball arm system. 1"
version mounts to TLC, Ultralite, and Sea & Sea Arm V. Not
required if you buy an Ikelite arm package.
9577.42 = 1.25"Ball. 9577.43
= 1" Ball
see arm components page. |
|
Substrobe
200
Discontinued: for spares and accessories, see DS200
page.
 |
High performance 200 Joule strobe with 100°
coverage. Features: built-in modelling light, sealed battery
compartment, LED battery status gauge, audible ready and TTL
error signals.
Modes: Man, 1/2, 1/4, 1/8, TTL.
ISO 100 exposure guide: f/11 @ 1m underwater.
Colour temp: 4800K. Recycle time ~1.6 sec. Weight 1.8Kg. 11.5cm
dia, 19cm long. |
 |
Substrobe
400
 |
400 Joules output, with 110°
coverage. Features: Built-in modelling light. Audible ready and
TTL error signals (sounder can be switched off if not required).
Battery pack and flash head are backwards compatible with earlier
TTL models 150, 225, and 300 (SS400 flash head can be fitted
to earlier TTL strobes, but earlier flash heads must not be used
on the SS400).
Modes: Man, TTL, Slave (on flash head). Full, 1/2, 1/4 (on rear
of power unit). Separate power and mode switches allow setting
of limited output in TTL mode, giving greater exposure accuracy
when short flash duration is required. Supplied with battery
pack and sync connector blanking cap.
ISO 100 exposure guide: f/16 @ 1m underwater.
Colour temp: 4800K. Full output recycle time: ~3.5 sec.
Weight: 3Kg. 14cm diam, 25.5cm long.
4058 Substrobe 400.......................................discontinued |
|
|
Spare modeling lamp for Substrobe
200, 150, 225, 300, 400
0042.56 7.2V 0.8A (5.8W) Halogen Lamp...............£ 5.99 |
| |
0137 Spare main sealing
ring .............................. £
5.99 |
| |
0581.3 Diffuser for S/s200/300/400........................£15.00 |
 |
Additional NiCd Module for
Substrobe 150, 225, 300, 400.
7.2V D-Cell NiCd Pack, with 3.5mm jack socket and voltage dropper
for charging from 12V source. Charging circuit has indicator
LED and thermal cut-out.
4051 7.2V 4.5Ah NiCd Module ...........................£ 120.00 |
 |
4063.51 SS400 Smart charger
adapter................ £
9.50
Connects directly to the 4051 battery terminals (bypassing the
internal charging circuitry) as required by Smart charger voltage
sensing system. |
E&OE |
01404 812277