Coverage: 70°, 80° with supplied diffuser.
Guide # (ISO 100 / m): 17 air, 9 uw.
Flash energy (Full output): 50J
Modes: TTL, Full, -½EV (0.7x full), -1EV (0.5x),
-1½ EV(0.35x), -2EV (0.25x), -2½EV (0.18x).
 Colour temp:
5700K (Daylight)
 Power source:
4x AA cells, Alkaline, NiMH or NiCd.
Flashes per battery: approx 200 at full output (alkaline
cells).
 Recycling time:
3.5 sec. at full output. |
 |
|
Dimensions: 8cm diameter, 12 cm long.
Weight: 0.6Kg.
Sync connector: ICS5 TTL with power output for TTL converters
and slave sensor / EV controller.
Mounting system: Substrobe M-type T-slot. Ball mount must
be purchased separately or as part of arm package. |
|
4044.1 |
DS-51, strobe head only, with diffuser. |
£ 289.35 |
£ 339.99 |
|
3944.48 |
Sync cord + Flex Arm Package: DS-51 + 4103.51 sync cord
+ 4087.1 arm. NEW |
£ 360.86 |
£ 424.01 |
|
3944.49 |
EV controller* +Flex Arm Package: DS-51 + 4100.6
EV controller + 4087.1 arm. NEW |
£ 391.30 |
£ 459.78 |
|
3944.51 |
Sync cord + Ball Arm Package: DS-51 + 4103.51 sync cord
+ 4086.61 (SA-100R) 1" ball arm. |
£ 425.52 |
£ 499.99 |
|
3944.52 |
Dual sync cord + Ball Arm Package: DS-51 + 4103.52 dual
sync cord + 4086.61 (SA-100R) 1" ball arm. |
£ 469.56 |
£ 551.73 |
|
3944.54 |
EV controller* + Ball Arm Package: DS-51 + 4100.6 EV controller + 4086.61 1"
ball arm. |
£ 468.08 |
£ 549.99 |
|
4087.1 |
Flex arm for DS51 strobe to Ikelite quick release |
£ 43.47 |
£ 51.08 |
|
0561.2 |
Diffuser for DS-50, 51 (spare) |
£ 8.17 |
£ 9.60 |
|
- |
|
- |
- |
|
9440.42 |
Battery door with O-ring: grey (spare) |
£ 8.51 |
£ 10.00 |
|
9440.43 |
Battery door with O-ring: red (spare) |
£ 8.51 |
£ 10.00 |
|
9440.45 |
Battery door with O-ring: clear (spare) |
£ 8.51 |
£ 10.00 |
|
* Package assumes EV controller will be slave triggered. If housing
has sync connector, EV controller can be connected electrically,
but suitable sync cord must
be purchased separately. |
Accessories
Ikelite trays
Ikelite digital stills and SLR housings are either supplied with
or can be fitted with a tray to which the 4087.1 and 4086.61
arms attach directly. Other manufacturers' housings will require
a tray which accepts Ikelite quick-release arms, such as Ikelite 9523.01. |
 |
Light bracket and Mini C-Lite.
See Mini C-light page.
Remove the mounting lug or ball from the substrobe and fit the
Lite-bracket in its place. Refit the strobe mount to the
bottom of the Lite-bracket. The mini C-lite slides into the bracket
and is held in place by its pocket clip.
Mini C-Lite H: 7.5W spot beam. Powered by 4 x C cells
(3-4 hour burn). 7 x 16cm. |
|
Macro M Mount - see Ikelite
arms page.
Mounts the Substrobe to the top of housings and cameras with
an accessory shoe. Good lighting position for general macro photography,
easily released for hand-holding.
Comprises: 9577.41 Ball Mount (1.25" ball), 9577.2 Ball
clamp, 9577.6 Accessory shoe ball mount (1.25" ball). Parts
are also available separately - see arm
components section. |
E&OE |
Depth rating:
90m
TTL + 6 manual
output settings in ½EV steps.
Removable diffuser
included.
Controlled pre-flash
gives slave compatibility with digital stills cameras.
Compatible with
all current Ikelite TTL SLR housings. Interface protocol is Nikonos
TTL compatible.
01404 812277