ikelite EV controller

EV Controller with slave sensor

Converts ikelite DS-series TTL substrobe to variable guide-number manual flash.

10 Manual power settings in ½EV (½ f-stop) increments.

Slave sensor built-in. Can also use electrical triggering via Ikelite sync cord.

Works with conventional and pre-flash cameras.

Additional Substrobe with TTL slave will duplicate the manual setting of the EV controller. (It is not possible to fit a dual cable to the EV controller).

Works only with ikelite DS-series.

Slave sensor with EV controller
ikelite #4100.6 £130.00

Mounting options
EV controller mounts on a ¾" (19mm) diameter bar or tube.

Extended quick-release stems 9571.3 (1" ball) and 9573.3 (3/4" Loc-line base) attach the sensor to the top of the handle on an ikelite camera tray (good position for picking-up intenal flash of camera). 1" ball clamp with ¾" diameter stub allows the sensor to be mounted at arm-joint. Mounts are also available from Ultralight and TLC.

ikelite EV controller on TLC lattice arm

	Loc-line base ball (28mm dia.) to quick-release socket Attaches flex arm to handgrip. Not for use with ball clamps ikelite #9573.3	£26.99
	1″ plain ball to ikelite quick-release socket Long ¾″ stem for EV controller, etc. ikelite #9571.3	£22.99
	Ball (with O-ring), to fit ikelite quick-release socket ¾″ diam stem for EV controller etc. Ultralight BA-IKT	£32.99
	1″ ball clamp with post 3/4″ diam. stub for EV controller, etc. ikelite #9571.23	£43.99
	Ball with ¼″ stud and locknut, ¾″ stem. Provides ball mount for handle TR-DH and ¾″ shoulder for slave sensor, etc. Ultralight AD-TTLd	£28.00
	Ball with ¾″ stub Attaches ikelite EV controller to spur-arm or 3-ball clamp, etc. Ultralight AD-TTL	£25.00
	¾″ diam. bar mount, with TLC side clamp mounts ikelite sensor etc. on side of TLC lattice arm TLC #17856	£71.99

E&OE

Cameras Underwater