Instructions for INON M67 Lensholders

Package Contents

Type S

Type W

Type S (for 1 lens) comprises: Lensholder disk with M5 socket. Back retainer. M5 wing-bolt. Type W (for 2 lenses) comprises: Lensholder disk with M5 socket. Lensholder disk with 5mm hole and recess. M5 Allen-head bolt. Allen key (hex wrench) 4mm AF. Back retainer. M5 wing-bolt.

Assembly Procedure

Type S, or type W assembled to hold only one lens. Type W Lensholder fits INON and Ultralight lattice-arm sections, or any bar 10mm x 25mm cross section with midline hole or cutout larger than 5mm. Assemble as per appropriate illustration above. Do not use excessive force when tightening retaining bolt. For INON arm: Tighten just sufficiently to clamp arm without sliding or movement. For Ultralight arm: Due to 1" (25.4mm) maximum width of arm bar, lensholder is a tight fit. Press lensholder disk and back retainer (if used) into place while maintaining fixing hole alignment. Tighten retaining bolt just sufficiently to clamp lensholder onto bar.