 |
Flash for underwater housings
with
Olympus
connector |
 |
Electrical triggering allows the camera built-in flash to be
switched off, conserving the camera battery and eliminating light
leakage into the lens port. |
Olympus
PFL-01 Flash Housing and FL-20 Flash
| PFL-01 |
Flash housing for FL-20, including
sync cord, hot shoe connector, diffuser, fixing bolt, etc |
£ 195.74 |
£ 229.99 |
| FL-20 |
FL-20 Camedia TTL flash unit. |
£ 106.38 |
£ 124.99 |
PFL-01 +
FL-20 |
Flash +
housing package |
£ 255.31 |
£ 299.99 |
| PHCB-01 |
Hot shoe cable for PFL-01 (spare) |
£ 25.52 |
£ 29.99 |
| PTCB-01 |
TTL cable for PFL-01 (spare) |
£ 68.08 |
£ 79.99 |
|
Spare
O-rings
| POL-201A |
Flash housing OR primary |
£ 14.99 |
| POL-201B |
Flash housing OR secondary |
£ 14.99 |
| PSOLG-1 |
O-ring
lubricant. |
£ 6.99 |
|
 |
Olympus
PFL-E01 Flash Housing and FL-36 Flash
PFL-E01
Underwater housing for FL-36 flash.
Kit includes: TTL sync cable, internal hot-shoe connector cable
for the camera housing (PHCB-01), and diffuser.
 YS Mount - fits
lighting arms with Sea & Sea type attachment. |
 |
| flash and housing are purchased separately. |
ex VAT |
inc VAT |
| PFL-E01 |
Underwater Housing for FL-36
flash
(flash not included). |
- |
please call |
| FL-36 |
FL-36 flash |
£ 153.618 |
£ 179.99 |
| PACKAGE |
Olympus FL-36 flash
+ PFL-E01 housing |
- |
please call |
| PTCB-E01 |
Underwater TTL Cable (spare). |
£ 46.80 |
£ 54.99 |
|
|
 |
Olympus Hot-shoe connector PHCB-01
Connection from camera to inside of flash bulkhead socket.
 Required when
using Epoque strobes with Olympus housings. |
|
| ES-SC-OLF |
Epoque to Olympus bulkhead cable
Allows Epoque strobe to be directly connected to Olympus housing
with bulkhead. Requires Olympus PHCB-01 below. |
£ 51.06 |
£ 60.00 |
| PHCB-01 |
Olympus hot-shoe connector
(Connects Camera's hot-shoe to Olympus housing bulkhead) |
£ 25.52 |
£ 29.99 |
See Also:
Note on the Olympus flash connector:
If your housing has a sync connector with a metal thread, do
not leave the sync cable connected to it for long periods. The
metal version of the Olympus connector requires frequent maintenance.
Remove the cap or plug after diving and apply O-ring grease to
the screw thread before reassembly. Failure to carry out this
procedure may result in seizure of the screw thread due to salt
water corrosion. Attempting to remove the blanking cap or sync-cable
plug by force will rip the bulkhead connector from the housing
and is likely to cause irreparable damage. |
 |
E&OE |
Included coiled
cable allows operation up to 1m from the camera housing.
Gives
manual flash sync with 
01404 812277