#6130.80
camera not included Depth rating:
60m. TTL flash
via cable with optional DS-series
Substrobes. Conserves camera battery by avoiding use of internal
flash for slave triggering. Pop-up
flash cannot be used.. Includes tray
and handle with quick-release socket for lighting arms. Controls for all
camera functions. Battery and memory
card can be changed without removing camera from internal tray. Thick-wall polycarbonate
housing with robust screw-thread port mounting.
Weight:
less than 3.2Kg with camera. Dimensions: width: 10.25", 7" without tray;
height: 6.5" including buttons; depth: 8"
including standard port and back knobs.
Using an external flash unit will improve your pictures by reducing
backscatter.
Flash interface circuitry allows full TTL control via the hot-shoe
with Ikelite DS-50 and DS-125 Substrobes.
Microcontroller-based interface module is powered from
the DS-Substrobe via 5-core (blue-band) sync cable 4103.51 (single
strobe) or 4103.52 (dual strobe). Reverts to manual trigger in
absence of power. Slave triggering
is also possible, but precludes use of flash in supermacro mode.
Strobe with built-in
light, or auxiliary torch to act as focusing light is recommended.
Shown left: Ikelite housing with optional DS-125 TTL Substrobe,
sync cable 4103.51, and SA-100R ball-joint arm (Substrobe package
#3944.75)
01404 812277
Depth rating:
60m.
TTL flash
via cable with 
Pop-up
flash cannot be used..
Includes tray
and handle with quick-release socket for lighting arms.
Using an external flash unit will improve your pictures by reducing
backscatter.
push fit.
